Аксессуары

Центральная подставка aбсолютная необходимость для всех, кто путешествует с багажом.Несокрушимая, но легкая конструкция из стальных труб обеспечивает наилучший угол наклона и дорожный просвет, легко поднимается домкратом и обеспечивает устойчивость - как во время технического обслуживания, так и в дороге. В большинстве случаев вам больше не придется покупать дополнительную подставку для поворотного рычага. Во время длительных простоев в зимние месяцы центральная подставка помогает снять нагрузку с шин.    Надежная подставка при поездках с большим количеством багажа и во время технического обслуживания    Конструкция, разработанная специально для мотоцикла, обеспечивает простоту установки и высокий клиренс при прохождении поворотов    Легко поднять мотоцикл    Выступ для оптимального рычага    Лучшая коррозионная стойкость благодаря пескоструйной обработке и порошковому покрытию поверхности    Изготовлен из прочной сталиВ комплект поставки входят    1 x центральная подставка    Инструкции по монтажу    Монтажный материалПодробности    Материал: Сталь    Поверхность: порошковое покрытие    Цвет: чёрный    Общий вес: около 3,2 кг / около 7,0 фунтов

Центральная подставка обязательно для всех, кто путешествует с багажом. Облегчает чистку цепи и общее обслуживание мотоцикла. Неразрушимая, но легкая конструкция из стальных труб обеспечивает наилучший дорожный просвет. При длительном бездействии в зимние месяцы центральная подставка помогает снизить нагрузку на шины.      Конструкция мотоцикла проста в сборке      Легко поднять мотоцикл      Лучшая коррозионная стойкость благодаря пескоструйной очистке и порошковому покрытию      Изготовленa из прочной сталиВключено в поставку:      1 х центральная подставка      Руководство по сборке      Монтажный материалПодробности:     Материал: Сталь.      Поверхность: порошковое покрытие      Черный цвет      Общий вес: прибл. 3,7 кг / прибл. 8,1 фунтов

Bar riser for Ø 28 mm handlebar These specially adapted bar risers made from rugged, CNC-milled aluminum raise the handlebar by 20 mm and provide noticeably more riding comfort. The sturdy and weather-resistant bar riser fits on handlebars with a diameter of 28 mm.   Raises handlebars by 20 mm   Bike-specific Vehicle Type Approval for use on German roads is available for many motorcycle models.    For a more relaxed sitting position    Replaces the original handlebar clamp    For Ø 28 mm handlebars with a hole distance of 37-46 mm    Made from high-strength aluminum alloy, CNC-etchedIncluded:   Handlebar Risers   Mounting material    Mounting instructionsDetails    Material: Aluminum    Surface: powder coated    Color: silver    Total Weight: appr. 0,4 kg / appr. 0.8 lb Note: Please ensure that your bike has adequate cable length / check applications tab for correct bike fitment. When fitting handlebar risers to Triumph Bonneville, original handlebar top clamps need to be used.

The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires.    Stands securely when traveling with lots of luggage and during maintenance    Bike-specific design for easy mounting and high cornering clearance    Easy to lift up the motorcycle    Outrigger for optimal leverage    Best corrosion resistance due to sand blasting and powder coating of the surface    Made of robust steelIncluded in delivery    1 x Centerstand    Mounting instructions    Mounting materialDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 2,7 kg / appr. 5.8 lb

With these clamps, EVO lights can be mounted to crash bars or other bike parts with the appropriate pipe diameter. Rubber inserts for adapting to 22/25.4/26/27 mm and 28 mm are included in delivery.    For mounting on crash bars or other vehicle parts with the corresponding diameter    For SW-MOTECH EVO lights    Includes rubber inserts for adapting to 22/25.4/26/27 mm and 28 mm.    Made from fiberglass-reinforced polyamideIncluded in delivery    2 x Crash bar clamps for EVO lights    Mounting instructions    Mounting materialDetails    Material: Polyamide    Color: black    Total Weight: appr. 0,2 kg / appr. 0.5 lb

Made of high strength aluminum alloy and CNC milled. Larger contact surface prevents sinking in soft ground. Side Stand Extension is silver anodized. Upper mounting plate is black powder-coated.    Side stand foot with doubled contact surface (bike specific)    For secure positioning on soft or uneven ground    Bike-specific development for best fit    Simple mounting onto the original side stand using three screws    High-quality workmanship: CNC-milled, made of anodized aluminum alloy and corrosion-resistant stainless steelIncluded in delivery    1 x Extension for side stand foot    Mounting instructions    Mounting materialDetails    Material: Aluminum / Stainless steel    Surface: anodized    Color: black / silver    Total Weight: appr. 0,1 kg / appr. 0.2 lb

The new EVO foot pegs offer stability, comfort and traction under a variety of conditions. Individual adjustments for height, position and angle guarantee best possible ergonomics.The pegs offer 12 position settings from standard to 15 mm lower and up to 7.5 mm forward or back. The face angle can also be changed +/- 18 degrees giving 36 possible settings. There is a removable rubber pad to suit all riding conditions.Features:       Easy installation to original mounting points Large 89 mm x 64 mm foot pad        Removable rubber for additional comfort       Deep serrations offer enhanced grip        Reference marks for symmetrical set up on both sides        Material: Electropolished cast stainless steel        Colour: Silver with black rubber insert       Total Weight: appr. 1,4 kg / appr. 3.1 lb Included:        Left and right bike specific mounting hinges        Left and right Evo foot rests        Removable rubber inserts        Mounting Hardware Installation instructionsFits: Aprilia       SL 750 Shiver '07-'16 BMW       F 800 GT '12-'16 F 800 R '08-'14 Kawasaki       KLV 1000 '03-'05 Suzuki      V-Strom 250 '18-       GSR 600 '05-'10       GSX 650F '07-'16       DL 650 V-Strom / V-Strom '04-'16       V-Strom 1000 / XT '14-'19       V-Strom 1050 / XT '20-       GSF 1250 Bandit /S '06-       GSX 1250 F ABS '09-

These bike-specific bar backs fit into the bike's design just as seamlessly as the bar risers. With a height increase of 20 mm, the handlebars are moved back by 30 mm to ensure an optimal sitting position for the driver. High-quality anodizing protects the surface from scratches and weather conditions.If you're having trouble reaching your handlebars comfortably, consider using a bar back. Our sturdy backs made from aluminum shift the handlebar upward and to the back. For the rider, that can mean a more relaxed, back-friendly seating position, along with better control of the bike. BMW R 1200 GS '08-'12 Handle Bar Risers / Bar Backs by SW-Motech                Replaces original handlebar clamps to raise bars by 20mm up and back by 30mm               No change of control cables, wiring, or hoses is required for most motorcycles however,                the installer should always check  for adequate cable/wiring/hose slack during installation               Colour: Silver Included:            2 x Bar back          2 x Handlebar clamps          Mounting instructions          Mounting materialDetails           Material: Aluminum         Surface: anodized         Color: silver         Total Weight: appr. 0,6 kg / appr. 1.3 lb

Legend Gear Leg Bag LA8 by SW-MotechWith its' 1.25L capacity the leg bag LA8 is the perfect size to carry the most important items on your body. The bag can be used on it's own, but is designed to lash onto the LA7 holster (shown in 2 of the images, needs to be purchased separately). It also attaches to all other SW-Motech accessories, which are using the M.O.L.L.E. system.      Padded inner storage with 2 pen holders and multiple other compartments      Made of durable napalon synthetic leather & waxed canvas, with water resistant PU interior coating      Waterproof inner rain liner included      Color: Black / Brown      Weight: 0.17 Kg      Size: 19.5 x 13 x 5 cm      Volume: 1.25 L Included:      1 Legend Gear Leg Bag LA8     1 Legend Gear Leg Bag Holder LA7     1 Rain Cover     Mounting Instructions

This sport mirror set boasts a long mirror arm. It can be mounted on motorcycles with mirror mounts with an M10 thread.SW-MOTECH manufactures the adjustable mirrors in a modern and flat design from high-quality forged and black anodised aluminum. The mirror arms consist of continuously adjustable elements and can each be extended by 30 millimeters. This allows the height and length of the mirrors to be adjusted to the requirements of the respective pilot.    With long mirror arm    For mirror mounts with M8 thread     Modern and flat edge design     Partial areas and functional surfaces milled 4 different adjustment possibilities for best possible alignment     Stepless rotation and inclination of the mirror arm    Length of the mirror arm continuously adjustable in the range of 30 mm     Mounting on an existing mirror connection     With ECE test markIncluded in delivery   1 x Mirror Set Sport 1 x    Mounting material for mirror set    Mounting instructions    Mounting material   Details Material: aluminum    Color: black   Total Weight: appr. 0.9 kg / appr. 2.0 lb

This sport mirror set boasts a long mirror arm. It can be mounted on motorcycles with mirror mounts with an M8 thread.SW-MOTECH manufactures the adjustable mirrors in a modern and flat design from high-quality forged and black anodised aluminum. The mirror arms consist of continuously adjustable elements and can each be extended by 30 millimeters. This allows the height and length of the mirrors to be adjusted to the requirements of the respective pilot. With long mirror arm    For mirror mounts with M8 thread     Modern and flat edge design     Partial areas and functional surfaces milled 4 different adjustment possibilities for best possible alignment     Stepless rotation and inclination of the mirror arm    Length of the mirror arm continuously adjustable in the range of 30 mm     Mounting on an existing mirror connection     With ECE test markIncluded in delivery   1 x Mirror Set Sport 1 x    Mounting material for mirror set    Mounting instructions    Mounting material   Details Material: aluminum    Color: black   Total Weight: appr. 0.9 kg / appr. 2.0 lb

Husaberg/Husqvarna/KTM clutch slave CLU-1000Replaces (OEM Part) 75032061044, 59032061044, K26632061044, K79432061044, 79432061044 or 76132061044.This Oberon Performance clutch slave cylinder has been designed to improve the efficiency and looks of the original clutch slave cylinder. The internal piston design and seal have been drastically enhanced to prevent leaks and leave a smoother clutch action. CNC machined from 6000 series billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.Husqvarna Husqvarna, 701 ENDURO, 2016-2022Husqvarna, 701 ENDURO LR, 2020-2021Husqvarna, 701 SUPERMOTO, 2016-2022Husqvarna, FC 450, 2018-2021Husqvarna, FE 450, 2017-2021Husqvarna, FE 501, 2017-2021Husqvarna, FE 501s, 2020-2021Husqvarna, FS 450, 2018-2021Husqvarna, FX 450, 2017-2021Husqvarna, SVARTPILEN 701, 2019-2022Husqvarna, VITPILEN 701, 2018-2022 Husaberg Husaberg, FE390, 2011-2012Husaberg, FE450, 2009-2011Husaberg, FE570, 2009-2012Husaberg, FE570S, 2010-2011Husaberg, FX450, 2010-2010KTM KTM, 450 RALLY FACTORY REPLICA, 2004-2005KTM, DUKE 690, 2008-2019KTM, DUKE 690R, 2010-2019KTM, ENDURO 690, 2008-2010KTM, ENDURO 690R, 2009-2022KTM, EXC 250, 1998-2005KTM, EXC 250 FACTORY, 2005-2005KTM, EXC 250 RACING, 2001-2004KTM, EXC 250 RACING SIX DAYS, 2002-2003KTM, EXC 250 SIX DAYS, 2001-2005KTM, EXC 300, 1998-2005KTM, EXC 300 SIX DAYS, 2001-2005KTM, EXC 380, 1998-2002KTM, EXC 400 FACTORY, 2005-2007KTM, EXC 400 RACING, 2001-2007KTM, EXC 400 SIX DAYS, 2001-2003KTM, EXC 450 FACTORY, 2005-2007KTM, EXC 450 RACING, 2003-2007KTM, EXC 450 RACING SIX DAYS, 2004-2007KTM, EXC 520 RACING, 2000-2002KTM, EXC 525 RACING, 2003-2007KTM, EXC 525 SIX DAYS, 2003-2007KTM, MXC 250, 1998-2001KTM, MXC 300, 1998-2005KTM, MXC 380, 1998-2001KTM, MXC 400 RACING, 2001-2002KTM, MXC 520 RACING, 2001-2002KTM, MXC 525 DESERT RACING, 2003-2004KTM, MXC-G 450 RACING, 2003-2005KTM, MXC-G 525 RACING, 2003-2005KTM, RALLY 690 FACTORY REPLICA, 2007-2010KTM, SMC 690, 2008-2011KTM, SMC 690R, 2012-2022KTM, SMR 450, 2004-2007KTM, SMR 525, 2004-2005KTM, SMR 560, 2006-2007KTM, SMS 450, 2004-2004KTM, SUPERMOTO 690, 2007-2008KTM, SUPERMOTO 690R, 2008-2008KTM, SX 105, 2004-2006KTM, SX 250, 1998-2005KTM, SX 380, 1998-2002KTM, SX 400 RACING, 2000-2002KTM, SX 65, 2002-2013KTM, SX 85, 2003-2012KTM, SXC 540 RACING, 2001-2005KTM, SX-F 250, 2005-2006KTM, SX-F 450, 2006-2006KTM, SXS 450, 2006-2006KTM, SXS 450 RACING, 2003-2005KTM, XC 450, 2007-2007KTM, XC 450 ATV, 2008-2011KTM, XC 450 CROSS COUNTRY, 2004-2004KTM, XC 525, 2007-2007KTM, XC 525 ATV, 2008-2012KTM, XC 525 DESERT RACING, 2006-2007KTM, XC-G 450 RACING, 2006-2006KTM, XC-G 525 RACING, 2006-2006KTM, XC-W 400, 2007-2007KTM, XC-W 450, 2007-2007KTM, XC-W 525, 2007-2007

KTM LC8 engine clutch slave cylinder.   Designed to improve the efficiency and looks of the original KTM clutch slave cylinder for LC8 engines. The internal piston design and seal have been drastically enhanced to prevent leaks and leave a smoother clutch action. CNC machined from 6000 series billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.  Our piston seals are manufactured from special formula rubber which is frozen and then CNC machined with a 'U' profile which is specifically for hydraulic use, in addition the piston itself is guided by our unique back-plate to prevent piston wear and maintain correct alignment within the slave unit, and this ultimately gives a smoother lever action and prolongs product life. The piston has been designed to reduce lever effort, further increasing feel and reducing rider fatigue. Note: KTM Clutch Slave Cylinder Mounting Plate CLU-0122 not included.  Model fitment   KTM ADVENTURE 1050 ABS 2015 - 2016   KTM ADVENTURE 1090 2016 - 2018    KTM ADVENTURE 1090L 2017 - 2018    KTM ADVENTURE 1090R 2017 - 2018    KTM ADVENTURE 1190 ABS 2013 - 2016    KTM ADVENTURE 950 2003 - 2005    KTM ADVENTURE 950S 2003 - 2005    KTM ADVENTURE 990 2006 - 2012    KTM ADVENTURE 990R 2009 - 2012    KTM ADVENTURE 990S 2006 - 2008    KTM RC8 1190 2007 - 2010    KTM RC8 1190R 2009 - 2016    KTM RC8 1190R TRACK 2011 - 2012    KTM SUPER ADVENTURE 1290 2015 - 2018    KTM SUPER ADVENTURE 1290R 2017 - 2024    KTM SUPER ADVENTURE 1290S 2019 - 2024    KTM SUPER ADVENTURE 1290T 2017 - 2017    KTM SUPER DUKE 1290 GT 2016 - 2024    KTM SUPER DUKE 1290R 2014 - 2023    KTM SUPER DUKE 1290R EVO 2022 - 2023    KTM SUPER DUKE 1290RR 2021 - 2023    KTM SUPER DUKE 990 2004 - 2011    KTM SUPER DUKE 990R 2007 - 2013    KTM SUPER ENDURO 950R 2006 - 2008    KTM SUPERMOTO 950 2005 - 2007    KTM SUPERMOTO 950R 2007 - 2008    KTM SUPERMOTO 990 2008 - 2009    KTM SUPERMOTO 990R 2009 - 2013    KTM SUPERMOTO 990T 2009 - 2013

Mounting plate for all LC8 KTM Slave Cylinders. This product replaces the standard OEM plastic version. The Billet aluminium version produced by Oberon Performance will improve the mounting of either the original Slave Cylinder or the Oberon replacement KTM Clutch Slave Cylinder. Additionally due to the natural heat dissipation of the alloy used in the plate, a cooler running condition will prevail allowing a better clutch operation and more reliable performance.Note: You must retain the original spacers from your plastic backing plate and insert them into this mounting plate to complete the assembly.KTM LC8 engine clutch slave cylinder.   Designed to improve the efficiency and looks of the original KTM clutch slave cylinder for LC8 engines. The internal piston design and seal have been drastically enhanced to prevent leaks and leave a smoother clutch action. CNC machined from 6000 series billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.  Our piston seals are manufactured from special formula rubber which is frozen and then CNC machined with a 'U' profile which is specifically for hydraulic use, in addition the piston itself is guided by our unique back-plate to prevent piston wear and maintain correct alignment within the slave unit, and this ultimately gives a smoother lever action and prolongs product life. The piston has been designed to reduce lever effort, further increasing feel and reducing rider fatigue. Model fitment   KTM ADVENTURE 1050 ABS 2015 - 2016   KTM ADVENTURE 1090 2016 - 2018    KTM ADVENTURE 1090L 2017 - 2018    KTM ADVENTURE 1090R 2017 - 2018    KTM ADVENTURE 1190 ABS 2013 - 2016    KTM ADVENTURE 950 2003 - 2005    KTM ADVENTURE 950S 2003 - 2005    KTM ADVENTURE 990 2006 - 2012    KTM ADVENTURE 990R 2009 - 2012    KTM ADVENTURE 990S 2006 - 2008    KTM RC8 1190 2007 - 2010    KTM RC8 1190R 2009 - 2016    KTM RC8 1190R TRACK 2011 - 2012    KTM SUPER ADVENTURE 1290 2015 - 2018    KTM SUPER ADVENTURE 1290R 2017 - 2024    KTM SUPER ADVENTURE 1290S 2019 - 2024    KTM SUPER ADVENTURE 1290T 2017 - 2017    KTM SUPER DUKE 1290 GT 2016 - 2024    KTM SUPER DUKE 1290R 2014 - 2023    KTM SUPER DUKE 1290R EVO 2022 - 2023    KTM SUPER DUKE 1290RR 2021 - 2023    KTM SUPER DUKE 990 2004 - 2011    KTM SUPER DUKE 990R 2007 - 2013    KTM SUPER ENDURO 950R 2006 - 2008    KTM SUPERMOTO 950 2005 - 2007    KTM SUPERMOTO 950R 2007 - 2008    KTM SUPERMOTO 990 2008 - 2009    KTM SUPERMOTO 990R 2009 - 2013    KTM SUPERMOTO 990T 2009 - 2013

Made of high strength aluminum alloy and CNC milled. Larger contact surface prevents sinking in soft ground. Side Stand Extension is silver anodized. Upper mounting plate is black powder-coated.Please Note:     All 1190 Adv / R models 2014 onwards require prodcut: STS.04.102.10000/S     Check Applications tab for correct bike fitmentIncluded in delivery    1 x Extension for side stand foot    Mounting instructions    Mounting materialDetails    Material: Aluminum / Stainless steel    Surface: anodized    Color: black / silver    Total Weight: appr. 0,1 kg / appr. 0.2 lbFits KTM:    1050 Adventure '15-    1090 Adventure / R '17-    1190 Adventure / R '14- Please Note: The 2013 model requires product code: STS.04.102.10000/B    1290 Super Adventure '15-    1290 Super Adventure R/S/T '17-'20    1290 Super Adventure R '21- Please Note: Only for models with welded side stand

Made of high strength aluminum alloy and CNC milled. Larger contact surface prevents sinking in soft ground. Side Stand Extension is silver anodized. Upper mounting plate is black powder-coated.Please Note:     All 1190 Adv / R models 2014 onwards require prodcut: STS.04.102.10100/S     Check Applications tab for correct bike fitmentIncluded in delivery    1 x Extension for side stand foot    Mounting instructions    Mounting materialDetails    Material: Aluminum / Stainless steel    Surface: anodized    Color: black / silver    Total Weight: appr. 0,1 kg / appr. 0.2 lbFits Husqvarna:     Svartpilen 401 '18-      Vitpilen 401 '18- KTM:    125 Duke '11-     200 Duke '11-     390 Duke '13-     990 ADV '06-'11     1190 ADV / R 2013 only

This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector.The focus of the new development was on a compact shape and fulfilling the highest quality standards: the EVO fog lights are water- and dust-tight and protection class IP69. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Crash bar clamps for EVO lights    For mounting on crash bars or other vehicle parts with the corresponding diameter    For SW-MOTECH EVO lights    Includes rubber inserts for adapting to 22/25.4/26/27 mm and 28 mm.    Made from fiberglass-reinforced polyamideDetails    Material: Polyamide    Color: black    Total Weight: appr. 0,2 kg / appr. 0.5 lbEVO Fog lights    Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption    Compact size with a diameter of 7.1cm    Water- and dustproof (safety class: IP69)    Voltage: 12 V; cable harness for easy connection to the motorcycle battery is included, no change to motorcycle electric required    Splash-proof and illuminated handlebar switch for easy operation    Lights have an ECE test mark (ECE R19 F3)    Power: 12 W / luminous flux: 1,050 LM    Splash-proof and bright green handlebar switch for convenient operation    Mounting points on all four sides    Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsDetails    Material: Aluminum    Surface: powder coated    Color: black    Size: 7,1 x 7,1 cm / 2.8 x 2.8 in    Total Weight: appr. 1,3 kg / appr. 2.9 lbNote    Note that due to the curvature of the reflector the "TOP" mark must always be at the top.    Please observe the legal regulations applicable in your country for the operation and installation of fog lights.Required for mounting    Crash bar clamps or model-specific light mount available separately.

This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector.The focus of the new development was on a compact shape and fulfilling the highest quality standards: the EVO fog lights are water- and dust-tight and protection class IP69. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption    Power output: 12 W    Luminous flux: 1050 LM    ECE test mark: ECE R113 Rev.2    Highly concentrated beam with long-distance range    Compact size with a diameter of 7.1cm    Water- and dustproof (safety class: IP69)    Voltage: 12 V. Cable harness for easy connection to the motorcycle battery included in delivery, no change to motorcycle electric required    Splash-protected, blue glowing handlebar switch for comfortable operation (Protection class: IPX4)    Mounting points on all four sides    Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsIncluded in delivery    2 x EVO High beams    Mounting instructions    Mounting materialDetails    Material: Aluminum    Surface: powder coated    Color: black    Total Weight: appr. 1,3 kg / appr. 2.9 lbNote    Note that due to the curvature of the reflector the "TOP" mark must always be at the top.    Light clamps for crash bar and bike-specific mounts are available separately.    Please observe the legal regulations applicable in your country for the operation and installation of high beamsRequired for mounting    Crash bar clamps or bike-specific light mount

The highly concentrated light of the EVO high beams has a particularly wide range. This provides optimal lighting for the rider's view and ensures safety during on- or off-road riding. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector. Development is focused on meeting the strictest quality standards while also maintaining a compact shape: the EVO high beams are resistant to water and dust, with an IP69 protective class rating. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption    Power output: 12 W    Luminous flux: 800 LM    ECE test mark: ECE R113 Rev.2    Highly concentrated beam with long-distance range    Compact size with a diameter of 7.1cm    Water- and dustproof (safety class: IP69)    Voltage: 12 V. Cable harness for easy connection to the motorcycle battery included in delivery, no change to motorcycle electric required    Splash-protected, blue glowing handlebar switch for comfortable operation (Protection class: IPX4)    Mounting points on all four sides    Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsIncluded in delivery    2 x EVO High beams    Mounting instructions    Mounting materialDetails    Material: Aluminum    Surface: powder coated    Color: black    Total Weight: appr. 1,3 kg / appr. 2.9 lbNote    Note that due to the curvature of the reflector the "TOP" mark must always be at the top.    Light clamps for crash bar and bike-specific mounts are available separately.    Please observe the legal regulations applicable in your country for the operation and installation of high beamsRequired for mounting    Crash bar clamps or bike-specific light mount

TRAVELLER PILLION Cushion By SW-MotechEnjoy long rides with the TRAVELLER PILLION cushion. By utilising a durable polyurethane air cushion the TRAVELLER PILLION prevents painful pressure points and dampens vibration. Furthermore, the breathable, air weaving spacer fabric reduces heat and sweat built up. A non-slip underside and retaining straps keeps the cushion in place securely. The bi-elastic, rugged artificial leather seat surface provides additional comfort. Air volume can be adjusted via an integrated valve to provide more comfort or a more direct feel on curvy mountain tours. The rectangular shape of the TRAVELLER PILLION is particularly suited for pillion seats, bench seats and skinny dual sport seats.Features of this SW-Motech Cushion make it superior to others on the market:     Surface: bi-elastic artificial leather, which stretches in both directions     Underside: polyester with non-slip coating     Air cushion: polyurethane Two stable tethers with ROK straps and non-slip underside for precise positioning           Straps connect under seat and prevent from being easily removed by thieves    UV Resistant Material    Zip puller is covered    Colour: Black   Dimensions: 22 x 30 cm

Наслаждайтесь длительными путешествиями с вкладышем для сиденья TRAVELLER PILLION. Благодаря прочной полиуретановой воздушной подушке TRAVELLER PILLION устраняет болезненные точки давления и гасит вибрации. Кроме того, дышащая, воздухопроницаемая ткань подкладки уменьшает накопление тепла и пота.Нескользящее дно и фиксирующие ремни надежно удерживают подушку на месте. Двусторонняя, гибкая, прочная поверхность сиденья из искусственной кожи обеспечивает дополнительный комфорт. Объем воздуха можно регулировать с помощью встроенного клапана для большего комфорта или более прямого ощущения на извилистых горных маршрутах. m.Характеристики этого SW-Motech TRAVELLER делают его лучше других на рынке:    Биэластичная синтетическая кожа, которая растягивается в обоих направлениях.    Дно: полиэстер с противоскользящим покрытием.    Воздушная подушка: полиуретан    Два устойчивых крепления с ремнями ROK и нескользящее дно для точного позиционирования.    Ремни соединяются под сиденьем и предотвращают легкое снятие ворами.    Материал, устойчивый к ультрафиолетовому излучению    Застежка-молния с покрытием    Цвет: черныйВходит в комплект поставки:    1 x подушка TRAVELLER PILLION    Инструкции по установкеПодробности:    Размер: 22,0 x 30,0 см     Общий вес: около 0,6 кг

Наслаждайтесь длительными путешествиями с вкладышем для сиденья TRAVELLER PILLION. Благодаря прочной полиуретановой воздушной подушке TRAVELLER PILLION устраняет болезненные точки давления и гасит вибрации. Кроме того, дышащая, воздухопроницаемая ткань подкладки уменьшает накопление тепла и пота.Нескользящее дно и фиксирующие ремни надежно удерживают подушку на месте. Двусторонняя, гибкая, прочная поверхность сиденья из искусственной кожи обеспечивает дополнительный комфорт. Объем воздуха можно регулировать с помощью встроенного клапана для большего комфорта или более прямого ощущения на извилистых горных маршрутах. m.Характеристики этого SW-Motech TRAVELLER делают его лучше других на рынке:    Биэластичная синтетическая кожа, которая растягивается в обоих направлениях.    Дно: полиэстер с противоскользящим покрытием.    Воздушная подушка: полиуретан    Два устойчивых крепления с ремнями ROK и нескользящее дно для точного позиционирования.    Ремни соединяются под сиденьем и предотвращают легкое снятие ворами.    Материал, устойчивый к ультрафиолетовому излучению    Застежка-молния с покрытием    Цвет: черныйВходит в комплект поставки:    1 x подушка TRAVELLER PILLION    Инструкции по установкеПодробности:    Размер: 30.5 x 30 cm.    Общий вес: около 0,5 кг

Центральная подставка обязательно для всех, кто путешествует с багажом. Облегчает чистку цепи и общее обслуживание мотоцикла. Неразрушимая, но легкая конструкция из стальных труб обеспечивает наилучший дорожный просвет. При длительном бездействии в зимние месяцы центральная подставка помогает снизить нагрузку на шины.      Конструкция мотоцикла проста в сборке      Легко поднять мотоцикл      Лучшая коррозионная стойкость благодаря пескоструйной очистке и порошковому покрытию      Изготовленa из прочной сталиВключено в поставку:      1 х центральная подставка      Руководство по сборке      Монтажный материалПодробности:     Материал: Сталь.     Поверхность: порошковое покрытие     Черный цвет     Общий вес: прибл. 3,2 кг / прибл. 7,0 фунтов

Центральная подставка обязательно для всех, кто путешествует с багажом. Облегчает чистку цепи и общее обслуживание мотоцикла. Неразрушимая, но легкая конструкция из стальных труб обеспечивает наилучший дорожный просвет. При длительном бездействии в зимние месяцы центральная подставка помогает снизить нагрузку на шины.      Конструкция мотоцикла проста в сборке      Легко поднять мотоцикл      Лучшая коррозионная стойкость благодаря пескоструйной очистке и порошковому покрытию      Изготовленa из прочной сталиВключено в поставку:      1 х центральная подставка      Руководство по сборке      Монтажный материалПодробности:     Материал: Сталь.     Поверхность: порошковое покрытие     Черный цвет     Общий вес: прибл. 2,7 кг / прибл. 5,9 фунтов